Unable to get my PC to detect controller and mem card

Discussion and Development board for the popular XBOX(360) controller driver.


Locked
Fayers
Junior Member
Posts: 1
Joined: Tue Nov 20, 2012 11:22 am

Unable to get my PC to detect controller and mem card

Post by Fayers »

I have a third party xbox controller (Powerpad), and a unnamed third party memory card plugged into that controller. The connection looks like this:

 


Xbox controller w/ mem card inserted (xbox cable, "spliced to" usb cable) into PC.

 


The PC recognizes the controller in USBview as this:

 


XBOX CONTROLLER

 


External Hub: USB#VID_FFFF&PID_FFFF#5&13ae804d&0&3#{f18a0e88-c30c-11d0-8815-00a0c906bed8}


Hub Power: Bus Power


Number of Ports: 3


Power switching: Individual


Compound device: Yes


Over-current Protection: Individual

 


Device Descriptor:


bcdUSB: 0x0110


bDeviceClass: 0x09


bDeviceSubClass: 0x00


bDeviceProtocol: 0x00


bMaxPacketSize0: 0x40 (64)


idVendor: 0xFFFF


idProduct: 0xFFFF


bcdDevice: 0x0100


iManufacturer: 0x00


iProduct: 0x00


iSerialNumber: 0x00


bNumConfigurations: 0x01

 


ConnectionStatus: DeviceConnected


Current Config Value: 0x01


Device Bus Speed: Full


Device Address: 0x02


Open Pipes: 1

 


Endpoint Descriptor:


bEndpointAddress: 0x81


Transfer Type: Interrupt


wMaxPacketSize: 0x0001 (1)


bInterval: 0xFF

 


Configuration Descriptor:


wTotalLength: 0x0019


bNumInterfaces: 0x01


bConfigurationValue: 0x01


iConfiguration: 0x00


bmAttributes: 0xA0 (Bus Powered Remote Wakeup)


MaxPower: 0x20 (64 Ma)

 


Interface Descriptor:


bInterfaceNumber: 0x00


bAlternateSetting: 0x00


bNumEndpoints: 0x01


bInterfaceClass: 0x09 (Hub)


bInterfaceSubClass: 0x00


bInterfaceProtocol: 0x00


iInterface: 0x00

 


Endpoint Descriptor:


bEndpointAddress: 0x81


Transfer Type: Interrupt


wMaxPacketSize: 0x0001 (1)


bInterval: 0xFF

 


Whenever I plug in the memory card, the PC acknowledges it and fails to install drivers for it (which is normal), but it doesn't show anywhere in USBView (should show up in the hub but does not).

 


Whenever I install XBCD, the drivers install fine, its just that it does nothing, the controller still doesn't respond and Action Replay still does not recognize my controller or memory card.

Squall Leonhart
Posting Freak
Posts: 1217
Joined: Tue Mar 18, 2008 2:21 am

Unable to get my PC to detect controller and mem card

Post by Squall Leonhart »

I don't recall adding any PowerPad devices to the driver, and i only see the device id info for the hub itself, rather than the attached pad.

 


There is no 64bit driver for the XBOX mem card available anyway, and i don't plan on taking up that side project of Redcl0uds at all.
Last edited by Squall Leonhart on Tue Nov 20, 2012 5:47 pm, edited 1 time in total.

Locked